Mobil Oil and Greases Distributor - East Coast Lubes - Gear Lubricants - Open

An unleaded, diluent-type, heavy-bodied semi-fluid open gear lubricant. It contains a non-chlorinated, volatile solvent to ensure fluidity during application to gear teeth. Suitable for use on draglines and mining shovels.

• Excellent protection of gear teeth under boundary lubrication conditions
• Excellent low-temperature pumpability, excellent resistance to water washout
• Minimal throw-off and dripping, reduced clean-up

Product Data Sheet:

Mobiltac 275 NC Product Data Sheet

Mobilgear SHC 22M and 46M are supreme performance ultra high viscosity synthetic lubricants designed specifically for use in heavily loaded, low speed gears where boundary lubrication conditions often prevail. They are designed specifically for heavy loaded, low speed open gearing which drives fixed rotating machinery. Product application is by spray nozzle systems. Specific applications include kilns and mills in metal mining, cement and limestone production and slow speed, heavily loaded plain and rolling contact bearings as found in sugar plants.

• Thick EHL fluid film formation and selected additives provide outstanding load-carrying, antiwear and tackiness properties
• Extended gear life, less downtime and reduced maintenance and replacement cost
• Excellent pumpability at ambient temperatures
• Reduced lubricant consumption and disposal costs

Material Safety Data Sheet:

Mobilgear SHC 46M Material Safety Data Sheet

Product Data Sheet:

Mobilgear SHC 46M Product Data Sheet

An unleaded, diluent-type, heavy-bodied open gear lubricant. It contains a non-chlorinated, volatile solvent to ensure fluidity during application, even at temperatures as low as -2 degrees Celsius. Once applied, the diluent evaporates and the lubricant takes on a flexible, adhesive, high-strength consistency which is maintained throughout its service life. Mobiltac 375 NC adheres strongly to gear teeth to resist excessive throw-off, thereby providing a wear-resistant, viscous, continuous film that lubricates well under boundary conditions. Mobiltac 375 NC will not harden, chip or flake in cold weather, is self-healing, and does not form hard-packed build-up in gear-tooth roots. Mobiltac 375 NC is recommended for the lubrication of higly loaded open gears, including those that operate at high temperatures, for example, ring gears on cement kilns and large gears on ore-processing mills.

• Excellent protection of gear teeth under boundary lubrication conditions
• Excellent low-temperature pumpability, excellent resistance to water washout
• Minimal throw-off and dripping, reduced clean-up
• No chipping or flaking at low temperatures

Material Safety Data Sheet:

Mobiltac 375 NC Material Safety Data Sheet

Product Data Sheet:

Mobiltac 375 NC Product Data Sheet

Mobilgear SHC 22M and 46M are supreme performance ultra high viscosity synthetic lubricants designed specifically for use in heavily loaded, low speed gears where boundary lubrication conditions often prevail. They are designed specifically for heavy loaded, low speed open gearing which drives fixed rotating machinery. Product application is by spray nozzle systems. Specific applications include kilns and mills in metal mining, cement and limestone production and slow speed, heavily loaded plain and rolling contact bearings as found in sugar plants.

• Thick EHL fluid film formation and selected additives provide outstanding load-carrying, antiwear and tackiness properties
• Extended gear life, less downtime and reduced maintenance and replacement cost
• Excellent pumpability at ambient temperatures
• Reduced lubricant consumption and disposal costs

Material Safety Data Sheet:

Mobilgear SHC 22M Material Safety Data Sheet

Product Data Sheet:

Mobilgear SHC 22M Product Data Sheet

Extremely high viscosity synthetic gear oils for ultimate gear protection. Designed for use in systems where the oil is captured, filtered and recirculated resulting in minimal wastage and disposal problems.

• Outstanding load-carrying and antiwear properties
• Outstanding thermal/oxidation resistance and long product life
• Very high viscosity provides excellent EHL film protection of gears and bearings even at slow speeds, high loads and high temperatures

Material Safety Data Sheet:

Mobilgear SHC 3200 Material Safety Data Sheet

Product Data Sheet:

Mobilgear SHC 3200 Product Data Sheet

Extremely high viscosity synthetic gear oils for ultimate gear protection. Designed for use in systems where the oil is captured, filtered and recirculated resulting in minimal wastage and disposal problems.

• Outstanding load-carrying and antiwear properties
• Outstanding thermal/oxidation resistance and long product life
• Very high viscosity provides excellent EHL film protection of gears and bearings even at low speeds, high loads and high temperatures

Material Safety Data Sheet:

Mobilgear SHC 6800 Material Safety Data Sheet

Product Data Sheet:

Mobilgear SHC 6800 Product Data Sheet