Products

About Mobil Delvac Synthetic Gear Oil 75W-90

Mobil Delvac Synthetic Gear Oil 75W-90 is a synthetic drive train lubricant engineered to meet the most demanding extended drain and warranty requirements. It is designed for use in heavy-duty drive trains that require gear lubricants with relatively high viscosity and excellent load carrying capability and where extreme pressures and shock loading are expected. Mobil Delvac Synthetic Gear Oil 75W-90 incorporate the latest technology in synthetic base stocks and advanced additives providing significant advantages over mineral gear oils.

Recommended by ExxonMobil for use in:

• Gearboxes requiring API GL-5 performance
• Not recommended for applications requiring API GL-4 Level performance
• Not intended for automatic, manual, or semi-automatic transmissions for which engine oil or automatic transmission fluids are recommended

About Mobil Delvac Synthetic Transmission Fluid 50

Mobil Delvac Synthetic Transmission Fluid 50 is a fully synthetic, manual transmission lubricant engineered to meet the most demanding extended drain and OEM warranty requirements. It is recommended for year-round lubrication of manual transmissions in light to severe duty on- and off-highway equipment operating in a wide range of environments. Designed to provide maximum protection and extended operating life to heavy duty transmissions, Mobil Delvac Synthetic Transmission Fluid 50 provides significant advantages over conventional sulphur-phosphorus gear oils, including outstanding high-temperature performance, oxidation stability, wear protection, and corrosion control.

It has the same viscosity as most SAE 50 engine oils and SAE 90 gear lubricants at the high end of the temperature-viscosity scale, and because of its inherently high viscosity index, it provides stronger film strength at higher temperatures than conventional oils. Mobil Delvac Synthetic Transmission Fluid 50 also ensures effective lubrication at below freezing temperatures without channelling.

The outstanding performance of this product is confirmed by its approval for heavy-duty transmissions covered by Eaton Roadranger and Extended Warranties of 750,000 miles, with oil drains of 500,000 miles. It is also approved by Mack against its TO-A Plus 500,000 mile extended service classification. Mobil Delvac Synthetic Transmission Fluid 50 meets or exceeds the requirements of the API service MT-1 EP gear oil service classification and is recommened by ExxonMobil for use in transmissions and gear cases where API Service GL-1 through GL-4 gear protection is required.

Features and Benefits:

The performance capabilities of today's heavy-duty on- and off-highway equipment have vastly improved in terms of load, speed, control, and reliability through innovative powertrain designs. These designs have markedly increased the demands on transmission lubricants, requiring them to deliver higher levels of performance while extending drains. For heavy-duty transmissions, friction control, wear protection, thermal stability, shear stability, rust and corrosion protection, and seal protection are features that must be balanced to provide extended gear and synchroniser life, smooth shift control, improved efficiency, and higher load capability over a wide range of applications and operating environments. Mobil Delvac Synthetic Transmission Fluid 50 delivers unequalled performance in today\'s manual transmissions.

Recommended by ExxonMobil for use in:

• Heavy-duty manual transmissions where extended service intervals and warranties are required
• On-highway, commercial light and heavy duty trucking, buses, and vans
• Off-highway industries including construction, mining, and agriculture
• Use as a companion with Mobil Delvac Synthetic Gear Oils in rear axles for maximum component life, service efficiency, and fuel economy improvement
• NOT suitable for hypoid gear applications in differentials and final drives, either for topping-off or refills, where API service GL-5 or MIL-PRF-2105E lubricants are specified.

About Mobilube GX-A 80W

Mobilube GX-A 80W is an automotive gear lubricant formulated from high performance base oils and an advanced additive system. This lubricant is engineered for commercial transmissions, axles, and final drives where protection against wear and scoring is required. It is recommended by ExxonMobil for use in Mercedes Benz applications and in applications where API GL-4 service is required.

Features and Benefits:

Today's drivetrain applications place higher performance demands on lubricants. Higher speeds, higher torque, and heavier loads require improved formulations to maximise equipment life and optimise operating costs. Longer service intervals place additional demands on the gear lubricant requiring effective basestock and additive systems. Mobilube GX-A 80W is engineered to meet these challenges.

Applications recommended by ExxonMobil for use in:

• Manual transmissions and drive axles requiring API GL-4 level performance
• Passenger cars, onhighway light and heavy-duty trucks and commercial vehicles
• Off-highway industries including: construction, quarrying, and agriculture
• Other industrial, commercial, and automotive applications including hypoid gears operating under moderate to severe operating conditions

About Mobilube XHP 75W-90

Mobilube XHP 75W-90 is an extra high performance manual transmission lubricant engineered for the latest heavy duty manual transmissions used in on highway commercial vehicles and cars. This transmission lubricant is designed using select base oils and an advanced additive package that enhances shifting performance, low temperature fluidity, and high temperature viscosity retention. Mobilube XHP 75W-90 is formulated with extended performance reserve for applications requiring API GL-4 service.

Features and Benefits:

Today\'s technology has vastly improved the performance capabilities of on highway vehicle load, speed, and control through innovative drivetrain designs. These designs have increased the requirements of lubricants to deliver a higher level of performance. For heavy duty manual transmissions, friction control, wear reduction, thermal stability, shear stability, rust and corrosion inhibition, and seal protection are features that must be optimally balanced to provide extended gear and synchroniser life, smooth shift control, fuel economy, and high load capability over a wide range of applications. Mobilube XHP 75W-90 delivers excellent performance in current as well as older model manual transmissions.

Recommended by ExxonMobil for use in:

• Heavy duty manual transmissions and gear cases where API GL-3/4 level performance is required
• Passenger cars, on highway light and heavy duty trucks, busses, and vans
• Where extended service and warranties are required.