Products

About Mobil DTE Oil Heavy

Mobil DTE Oil Named lubricants are premium performance circulating oils, designed for applications including steam and hydro turbine sets and other systems where long lubricant service life is required. They are formulated from highly refined base stocks and an additive system to provide an extremely high level of chemical and thermal stability, rapid and complete separation from water and high resistance to emulsification. As the lubricants of choice for many users, they have a reputation for long life, excellent equipment protection and outstanding versatility in the wide variety of industrial applications.

Refer to Turbine Oils category for more information on superior Mobil DTE turbine lubricant family of products.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity
• Extended equipment service intervals reduces maintenance costs
• Reduced pump cavitation and noisy, erratic operation
• Improved operating efficiency

Applications:

• Land-based and marine steam turbines, hydro turbines and some gas turbine circulation systems, including pumps, valves and other ancillary equipment
• Continuous service in plain and roller bearings and parallel shaft gears
• Turbines with oil supplied by splash, bath, ring oiling or other mechanical means
• Moderate severity hydraulic pumps
• Compressors and vacuum pumps handling air and inert gases with discharge temperatures not exceeding 150ºC

About Mobil DTE Oil Heavy Medium

Mobil DTE Oil Named lubricants are premium performance circulating oils, designed for applications including steam and hydro turbine sets and other systems where long lubricant service life is required. They are formulated from highly refined base stocks and an additive system to provide an extremely high level of chemical and thermal stability, rapid and complete separation from water and high resistance to emulsification. As the lubricants of choice for many users, they have a reputation for long life, excellent equipment protection and outstanding versatility in the wide variety of industrial applications.

Refer to Turbine Oils category for more information on superior Mobil DTE turbine lubricant family of products.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity
• Extended equipment service intervals reduces maintenance costs
• Reduced pump cavitation and noisy, erratic operation
• Improved operating efficiency

Applications:

• Land-based and marine steam turbines, hydro turbines and some gas turbine circulation systems, including pumps, valves and other ancillary equipment
• Continuous service in plain and roller bearings and parallel shaft gears
• Turbines with oil supplied by splash, bath, ring oiling or other mechanical means
• Moderate severity hydraulic pumps
• Compressors and vacuum pumps handling air and inert gases with discharge temperatures not exceeding 150ºC

About Mobil DTE Oil Light

Mobil DTE Oil Named lubricants are premium performance circulating oils, designed for applications including steam and hydro turbine sets and other systems where long lubricant service life is required. They are formulated from highly refined base stocks and an additive system to provide an extremely high level of chemical and thermal stability, rapid and complete separation from water and high resistance to emulsification. As the lubricants of choice for many users, they have a reputation for long life, excellent equipment protection and outstanding versatility in the wide variety of industrial applications.

Refer to Turbine Oils category for more information on superior Mobil DTE turbine lubricant family of products.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity
• Extended equipment service intervals reduces maintenance costs
• Reduced pump cavitation and noisy, erratic operation
• Improved operating efficiency

Applications:

• Land-based and marine steam turbines, hydro turbines and some gas turbine circulation systems, including pumps, valves and other ancillary equipment
• Continuous service in plain and roller bearings and parallel shaft gears
• Turbines with oil supplied by splash, bath, ring oiling or other mechanical means
• Moderate severity hydraulic pumps
• Compressors and vacuum pumps handling air and inert gases with discharge temperatures not exceeding 150ºC

About Mobil DTE Oil Medium

Mobil DTE Oil Named lubricants are premium performance circulating oils, designed for applications including steam and hydro turbine sets and other systems where long lubricant service life is required. They are formulated from highly refined base stocks and an additive system to provide an extremely high level of chemical and thermal stability, rapid and complete separation from water and high resistance to emulsification. As the lubricants of choice for many users, they have a reputation for long life, excellent equipment protection and outstanding versatility in the wide variety of industrial applications.

Refer to Turbine Oils category for more information on superior Mobil DTE turbine lubricant family of products.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity
• Extended equipment service intervals reduces maintenance costs
• Reduced pump cavitation and noisy, erratic operation
• Improved operating efficiency

Applications:

• Land-based and marine steam turbines, hydro turbines and some gas turbine circulation systems, including pumps, valves and other ancillary equipment
• Continuous service in plain and roller bearings and parallel shaft gears
• Turbines with oil supplied by splash, bath, ring oiling or other mechanical means
• Moderate severity hydraulic pumps
• Compressors and vacuum pumps handling air and inert gases with discharge temperatures not exceeding 150ºC

About Mobil DTE PM 220

Mobil DTE PM lubricants are high quality, high performance oils designed for demanding industrial paper machine circulating systems. They have proven performance capabilities in modern high output paper machine lubrication. Their excellent performance properties in wear protection, oxidation stability, chemical stability, rust and corrosion protection, colour stability and filterability extend maintenance service intervals, improve machine performance and increase production capacity.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity
• Optimum gear and bearing performance
• Reduced formation of deposits and emulsions

Applications:

• Lubrication of industrial paper machine circulating systems
• Circulation systems operating over a wide temperature range
• Systems that must be started and brought online quickly
• Circulation systems’ lubricating gears and bearings

About Mobil Glygoyle 22

Mobil Glygoyle 22 oil is a polyalkleneglygol-based (PAG) high performance lubricant that provides outstanding lubrication in extreme-temperature gear, bearing and circulation system application in conditions well beyond the capabilities of mineral oils. They are shear-stable and have outstanding resistance to thermal degradation, oxidation and the formation of sludge and deposits. They incorporate a proprietary additive package designed to enhance EP/anti-wear protection, corrosion and rust protection and foam resistance without detracting from the intrinsic attributes of the PAG base oil.

Mobil Glygoyle 22 has a very high viscosity index and, being wax free, has an extremely low pour point. Their coefficients of friction and taction (for example in non-conforming gear and bearing contacts) are lower than for mineral oils. The exceptional lubricity characteristics help deliver lower operating temperatures in many applications.

It is recommended for use by major plastic calendar, paper machine bearing, compressor and gear manufacturers, and is the product of choice for many severe service applications.

Advantages and potential benefits:

1. Superb thermal and oxidative stability, and resistance to sludge and deposit formation and which extends lubricant life, increased production, less scheduled and unscheduled downtime.
2. Low coefficients of traction and friction, reducing operating temperatures, greater equipment efficiency, and potential for reduced power consumption and long seal life
3. Excellent low-temperature fluidity, allows quicker warm-up at low ambient temperatures resulting in reduced power consumption and smoother running
4. Reduced gear tooth wear at high temperatures for both steel-on-steel and steel-on-bronze metallurgies, reducing operating costs due to less wear, reduced operating temperatures and smoother running
5. Reduced absorption and viscosity reduction with pressurised hydrocarbon gases, thereby improving film protection and log life for natural gas compressors

Applications:

Mobil Glygoyle lubricants are recommended for the most severe conditions in all types of plain and anti-friction bearings and industrial enclosed gears up to a bulk oil temperature of 200C.

Specific applications include:

1. High temperature paper machine bearings
2. Industrial enclosed gears - spur, bevel and worm gearing
3. Reciprocating and rotary air natural gas, CO2 and other process gases

About Mobil Glygoyle 30

Mobil Glygoyle 30 oil is a polyalkleneglygol-based (PAG) high performance lubricant that provides outstanding lubrication in extreme-temperature gear, bearing and circulation system application in conditions well beyond the capabilities of mineral oils. They are shear-stable and have outstanding resistance to thermal degradation, oxidation and the formation of sludge and deposits. They incorporate a proprietary additive package designed to enhance EP/anti-wear protection, corrosion and rust protection and foam resistance without detracting from the intrinsic attributes of the PAG base oil.

Mobil Glygoyle 30 has a very high viscosity index and, being wax free, has an extremely low pour point. Their coefficients of friction and taction (for example in non-conforming gear and bearing contacts) are lower than for mineral oils. The exceptional lubricity characteristics help deliver lower operating temperatures in many applications.

It is recommended for use by major plastic calendar, paper machine bearing, compressor and gear manufacturers, and is the product of choice for many severe service applications.

Advantages and potential benefits:

1. Superb thermal and oxidative stability, and resistance to sludge and deposit formation and which extends lubricant life, increased production, less scheduled and unscheduled downtime.
2. Low coefficients of traction and friction, reducing operating temperatures, greater equipment efficiency, and potential for reduced power consumption and long seal life
3. Excellent low-temperature fluidity, allows quicker warm-up at low ambient temperatures resulting in reduced power consumption and smoother running
4. Reduced gear tooth wear at high temperatures for both steel-on-steel and steel-on-bronze metallurgies, reducing operating costs due to less wear, reduced operating temperatures and smoother running
5. Reduced absorption and viscosity reduction with pressurised hydrocarbon gases, thereby improving film protection and log life for natural gas compressors

Applications:

Mobil Glygoyle lubricants are recommended for the most severe conditions in all types of plain and anti-friction bearings and industrial enclosed gears up to a bulk oil temperature of 200C.

Specific applications include:

1. High temperature paper machine bearings
2. Industrial enclosed gears - spur, bevel and worm gearing
3. Reciprocating and rotary air natural gas, CO2 and other process gases

Mobil Glygoyle 30 oil is a polyalkleneglygol-based (PAG) high performance lubricant that provides outstanding lubrication in extreme-temperature gear, bearing and circulation system application in conditions well beyond the capabilities of mineral oils. They are shear-stable and have outstanding resistance to thermal degradation, oxidation and the formation of sludge and deposits. They incorporate a proprietary additive package designed to enhance EP/anti-wear protection, corrosion and rust protection and foam resistance without detracting from the intrinsic attributes of the PAG base oil.

Mobil Glygoyle 30 has a very high viscosity index and, being wax free, has an extremely low pour point. Their coefficients of friction and taction (for example in non-conforming gear and bearing contacts) are lower than for mineral oils. The exceptional lubricity characteristics help deliver lower operating temperatures in many applications.

It is recommended for use by major plastic calendar, paper machine bearing, compressor and gear manufacturers, and is the product of choice for many severe service applications.

Advantages and potential benefits:

Superb thermal and oxidative stability, and resistance to sludge and deposit formation and which extends lubricant life, increased production, less scheduled and unscheduled downtime.Low coefficients of traction and friction, reducing operating temperatures, greater equipment efficiency, and potential for reduced power consumption and long seal lifeExcellent low-temperature fluidity, allows quicker warm-up at low ambient temperatures resulting in reduced power consumption and smoother runningReduced gear tooth wear at high temperatures for both steel-on-steel and steel-on-bronze metallurgies, reducing operating costs due to less wear, reduced operating temperatures and smoother runningReduced absorption and viscosity reduction with pressurised hydrocarbon gases, thereby improving film protection and log life for natural gas compressors

Applications:

Mobil Glygoyle lubricants are recommended for the most severe conditions in all types of plain and anti-friction bearings and industrial enclosed gears up to a bulk oil temperature of 200C.

Specific applications include:

High temperature paper machine bearingsIndustrial enclosed gears - spur, bevel and worm gearingReciprocating and rotary air natural gas, CO2 and other process gases

About Mobil SHC 624

The Mobil SHC 600 Series lubricants are exceptional performance gear and bearing oils designed to provide outstanding service in terms of equipment protection, oil life and problem-free operation helping to enable increased customer productivity. The Mobil SHC 600 Series of products feature excellent low temperature properties, as well as improved air release performance in the lower viscosity grades.

The Mobil SHC 600 Series of lubricants have low traction coefficients relative to mineral oils, derived from the molecular structure of the base stocks used. This results in low fluid friction in the load zone of non-conforming surfaces such as gears and rolling contact bearings. Low fluid friction produces lower operating temperatures and improved gear efficiency, which translates into reduced power consumption. The Mobil SC 600 Series products have demonstrated up to 3.6% improvement in energy efficiency in controlled laboratory testing.

Advantages and Potential Benefits:

The development of the Mobil SHC 600 series was the collaboration between Mobil scientists and application specialists with key Original Equipment Manufacturers (OEMs) to ensure that the products provide exceptional performance in the continually evolving industrial equipment designs.

1. Superb high temperature thermal/oxidation resistance, which helps extend equipment high temperature operating capability and increase oil life and reducing maintenance costs
2. High Viscosity Index and absence of wax, maintains viscosity and film thickness at high temperatures, which helps enable exceptional low temperature performance, including start-up
3. Low traction coefficient, helps reduce friction and increase efficiency in sliding mechanisms such as gearing, with potential for reduced power consumption and lower steady-state operating temperatures.

Applications:

1. Mobil SHC 600 Series lubricants are recommended for use in a wide variety of gear and bearing applications where high or low temperatures are encountered or where operating temperatures or bulk oil temperatures are such that conventional lubricants give unsatisfactory life, or where improved efficiency is desired. Filled for life gearboxes, especially high ratio/low-efficiency worm gears.
2. Remotely located gearboxes, where oil change-out is difficult
3. Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
4. Mixer roller bearings and roll neck bearings where high temperatures are encountered

About Mobil SHC 626

The Mobil SHC 600 Series lubricants are exceptional performance gear and bearing oils designed to provide outstanding service in terms of equipment protection, oil life and problem-free operation helping to enable increased customer productivity. The Mobil SHC 600 Series of products feature excellent low temperature properties, as well as improved air release performance in the lower viscosity grades.

The Mobil SHC 600 Series of lubricants have low traction coefficients relative to mineral oils, derived from the molecular structure of the base stocks used. This results in low fluid friction in the load zone of non-conforming surfaces such as gears and rolling contact bearings. Low fluid friction produces lower operating temperatures and improved gear efficiency, which translates into reduced power consumption. The Mobil SC 600 Series products have demonstrated up to 3.6% improvement in energy efficiency in controlled laboratory testing.

Advantages and Potential Benefits:

The development of the Mobil SHC 600 series was the collaboration between Mobil scientists and application specialists with key Original Equipment Manufacturers (OEMs) to ensure that the products provide exceptional performance in the continually evolving industrial equipment designs.

1. Superb high temperature thermal/oxidation resistance, which helps extend equipment high temperature operating capability and increase oil life and reducing maintenance costs
2. High Viscosity Index and absence of wax, maintains viscosity and film thickness at high temperatures, which helps enable exceptional low temperature performance, including start-up
3. Low traction coefficient, helps reduce friction and increase efficiency in sliding mechanisms such as gearing, with potential for reduced power consumption and lower steady-state operating temperatures.

Applications:

1. Mobil SHC 600 Series lubricants are recommended for use in a wide variety of gear and bearing applications where high or low temperatures are encountered or where operating temperatures or bulk oil temperatures are such that conventional lubricants give unsatisfactory life, or where improved efficiency is desired. Filled for life gearboxes, especially high ratio/low-efficiency worm gears.
2. Remotely located gearboxes, where oil change-out is difficult
3. Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
4. Mixer roller bearings and roll neck bearings where high temperatures are encountered
5. The Mobil SHC 626 is suitable for Oil Flooded Rotary Screw Compressors compressing natural gas, field gas gathering, CO2 and other process gasses used in the natural gas industry

About Mobil SHC 627

The Mobil SHC 600 Series lubricants are exceptional performance gear and bearing oils designed to provide outstanding service in terms of equipment protection, oil life and problem-free operation helping to enable increased customer productivity. The Mobil SHC 600 Series of products feature excellent low temperature properties, as well as improved air release performance in the lower viscosity grades.

The Mobil SHC 600 Series of lubricants have low traction coefficients relative to mineral oils, derived from the molecular structure of the base stocks used. This results in low fluid friction in the load zone of non-conforming surfaces such as gears and rolling contact bearings. Low fluid friction produces lower operating temperatures and improved gear efficiency, which translates into reduced power consumption. The Mobil SC 600 Series products have demonstrated up to 3.6% improvement in energy efficiency in controlled laboratory testing.

Advantages and Potential Benefits:

The development of the Mobil SHC 600 series was the collaboration between Mobil scientists and application specialists with key Original Equipment Manufacturers (OEMs) to ensure that the products provide exceptional performance in the continually evolving industrial equipment designs.

Superb high temperature thermal/oxidation resistance, which helps extend equipment high temperature operating capability and increase oil life and reducing maintenance costsHigh Viscosity Index and absence of wax, maintains viscosity and film thickness at high temperatures, which helps enable exceptional low temperature performance, including start-upLow traction coefficient, helps reduce friction and increase efficiency in sliding mechanisms such as gearing, with potential for reduced power consumption and lower steady-state operating temperatures.

Applications:

Mobil SHC 600 Series lubricants are recommended for use in a wide variety of gear and bearing applications where high or low temperatures are encountered or where operating temperatures or bulk oil temperatures are such that conventional lubricants give unsatisfactory life, or where improved efficiency is desired. Filled for life gearboxes, especially high ratio/low-efficiency worm gears.Remotely located gearboxes, where oil change-out is difficultLow temperature applications, such as ski lifts where seasonal oil changes can be avoidedMixer roller bearings and roll neck bearings where high temperatures are encounteredThe Mobil SHC 627 is suitable for Oil Flooded Rotary Screw Compressors compressing natural gas, field gas gathering, CO2 and other process gasses used in the natural gas industry

About Mobil SHC 629

The Mobil SHC 600 Series lubricants are exceptional performance gear and bearing oils designed to provide outstanding service in terms of equipment protection, oil life and problem-free operation helping to enable increased customer productivity. The Mobil SHC 600 Series of products feature excellent low temperature properties, as well as improved air release performance in the lower viscosity grades.

The Mobil SHC 600 Series of lubricants have low traction coefficients relative to mineral oils, derived from the molecular structure of the base stocks used. This results in low fluid friction in the load zone of non-conforming surfaces such as gears and rolling contact bearings. Low fluid friction produces lower operating temperatures and improved gear efficiency, which translates into reduced power consumption. The Mobil SC 600 Series products have demonstrated up to 3.6% improvement in energy efficiency in controlled laboratory testing.

Advantages and Potential Benefits:

The development of the Mobil SHC 600 series was the collaboration between Mobil scientists and application specialists with key Original Equipment Manufacturers (OEMs) to ensure that the products provide exceptional performance in the continually evolving industrial equipment designs.

1. Superb high temperature thermal/oxidation resistance, which helps extend equipment high temperature operating capability and increase oil life and reducing maintenance costs
2. High Viscosity Index and absence of wax, maintains viscosity and film thickness at high temperatures, which helps enable exceptional low temperature performance, including start-up
3. Low traction coefficient, helps reduce friction and increase efficiency in sliding mechanisms such as gearing, with potential for reduced power consumption and lower steady-state operating temperatures.

Applications:

1. Mobil SHC 600 Series lubricants are recommended for use in a wide variety of gear and bearing applications where high or low temperatures are encountered or where operating temperatures or bulk oil temperatures are such that conventional lubricants give unsatisfactory life, or where improved efficiency is desired. Filled for life gearboxes, especially high ratio/low-efficiency worm gears.
2. Remotely located gearboxes, where oil change-out is difficultLow temperature applications, such as ski lifts where seasonal oil changes can be avoided
3. Mixer roller bearings and roll neck bearings where high temperatures are encountered
4. The Mobil SHC 629 is suitable for Oil Flooded Rotary Screw Compressors compressing natural gas, field gas gathering, CO2 and other process gasses used in the natural gas industry
5. Mobil SHC 629 is approved by Siemens AG for use in Flender gearboxes

About Mobil SHC 630

The Mobil SHC 600 Series lubricants are exceptional performance gear and bearing oils designed to provide outstanding service in terms of equipment protection, oil life and problem-free operation helping to enable increased customer productivity. The Mobil SHC 600 Series of products feature excellent low temperature properties, as well as improved air release performance in the lower viscosity grades.

The Mobil SHC 600 Series of lubricants have low traction coefficients relative to mineral oils, derived from the molecular structure of the base stocks used. This results in low fluid friction in the load zone of non-conforming surfaces such as gears and rolling contact bearings. Low fluid friction produces lower operating temperatures and improved gear efficiency, which translates into reduced power consumption. The Mobil SC 600 Series products have demonstrated up to 3.6% improvement in energy efficiency in controlled laboratory testing.

Advantages and Potential Benefits:

The development of the Mobil SHC 600 series was the collaboration between Mobil scientists and application specialists with key Original Equipment Manufacturers (OEMs) to ensure that the products provide exceptional performance in the continually evolving industrial equipment designs.

1. Superb high temperature thermal/oxidation resistance, which helps extend equipment high temperature operating capability and increase oil life and reducing maintenance costs
2. High Viscosity Index and absence of wax, maintains viscosity and film thickness at high temperatures, which helps enable exceptional low temperature performance, including start-up
3. Low traction coefficient, helps reduce friction and increase efficiency in sliding mechanisms such as gearing, with potential for reduced power consumption and lower steady-state operating temperatures.

Applications:

1. Mobil SHC 600 Series lubricants are recommended for use in a wide variety of gear and bearing applications where high or low temperatures are encountered or where operating temperatures or bulk oil temperatures are such that conventional lubricants give unsatisfactory life, or where improved efficiency is desired. Filled for life gearboxes, especially high ratio/low-efficiency worm gears.
2. Remotely located gearboxes, where oil change-out is difficult
3. Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
4. Mixer roller bearings and roll neck bearings where high temperatures are encountered
5. The Mobil SHC 630 is suitable for Oil Flooded Rotary Screw Compressors compressing natural gas, field gas gathering, CO2 and other process gasses used in the natural gas industry
6. Mobil SHC 630 is approved by Siemens AG for use in Flender gearboxes

About Mobil SHC 632

The Mobil SHC 600 Series lubricants are exceptional performance gear and bearing oils designed to provide outstanding service in terms of equipment protection, oil life and problem-free operation helping to enable increased customer productivity. The Mobil SHC 600 Series of products feature excellent low temperature properties, as well as improved air release performance in the lower viscosity grades.

The Mobil SHC 600 Series of lubricants have low traction coefficients relative to mineral oils, derived from the molecular structure of the base stocks used. This results in low fluid friction in the load zone of non-conforming surfaces such as gears and rolling contact bearings. Low fluid friction produces lower operating temperatures and improved gear efficiency, which translates into reduced power consumption. The Mobil SC 600 Series products have demonstrated up to 3.6% improvement in energy efficiency in controlled laboratory testing.

Advantages and Potential Benefits:

The development of the Mobil SHC 600 series was the collaboration between Mobil scientists and application specialists with key Original Equipment Manufacturers (OEMs) to ensure that the products provide exceptional performance in the continually evolving industrial equipment designs.

1. Superb high temperature thermal/oxidation resistance, which helps extend equipment high temperature operating capability and increase oil life and reducing maintenance costs
2. High Viscosity Index and absence of wax, maintains viscosity and film thickness at high temperatures, which helps enable exceptional low temperature performance, including start-up
3. Low traction coefficient, helps reduce friction and increase efficiency in sliding mechanisms such as gearing, with potential for reduced power consumption and lower steady-state operating temperatures.

Applications:

1. Mobil SHC 600 Series lubricants are recommended for use in a wide variety of gear and bearing applications where high or low temperatures are encountered or where operating temperatures or bulk oil temperatures are such that conventional lubricants give unsatisfactory life, or where improved efficiency is desired. Filled for life gearboxes, especially high ratio/low-efficiency worm gears.
2. Remotely located gearboxes, where oil change-out is difficult
3. Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
4. Mixer roller bearings and roll neck bearings where high temperatures are encountered
5. Mobil SHC 632 is approved by Siemens AG for use in Flender gearboxes

About Mobil SHC 636

Mobil SHC 600 lubricants are recognised and appreciated around the world for innovation and outstanding performance. They are supreme performance oils for gears and bearings, designed to provide outstanding equipment protection, oil life and problem-free operation. The combination of a naturally high viscosity index and a unique, proprietary, additive system provides outstanding performance in service applications at extremely high and low temperatures, well beyond the capabilities of mineral oils.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity
• Extended equipment service intervals reduces maintenance costs
• Increased operating capacity, even at high temperatures
• Reliable flow and lubrication for easy startup, even at low temperatures
• Reduced formation of sludge and deposits for trouble-free operation and long filter life
• Lower overall friction reduces energy consumption

Applications:

• Filled for life gearboxes, especially high-ratio/low-efficiency worm gears
• Remotely located gearboxes, where oil change is difficult
• Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
• Mixer roll bearings and roll neck bearings where high temperatures are encountered
• Plastic calendars
• Severe centrifuge applications, including marine centrifuges
• Railroad A/C traction drives

About Mobil SHC 639

The Mobil SHC 600 Series lubricants are exceptional performance gear and bearing oils designed to provide outstanding service in terms of equipment protection, oil life and problem-free operation helping to enable increased customer productivity. The Mobil SHC 600 Series of products feature excellent low temperature properties, as well as improved air release performance in the lower viscosity grades.

The Mobil SHC 600 Series of lubricants have low traction coefficients relative to mineral oils, derived from the molecular structure of the base stocks used. This results in low fluid friction in the load zone of non-conforming surfaces such as gears and rolling contact bearings. Low fluid friction produces lower operating temperatures and improved gear efficiency, which translates into reduced power consumption. The Mobil SC 600 Series products have demonstrated up to 3.6% improvement in energy efficiency in controlled laboratory testing.

Advantages and Potential Benefits:

The development of the Mobil SHC 600 series was the collaboration between Mobil scientists and application specialists with key Original Equipment Manufacturers (OEMs) to ensure that the products provide exceptional performance in the continually evolving industrial equipment designs.

1. Superb high temperature thermal/oxidation resistance, which helps extend equipment high temperature operating capability and increase oil life and reducing maintenance costs
2. High Viscosity Index and absence of wax, maintains viscosity and film thickness at high temperatures, which helps enable exceptional low temperature performance, including start-up
3. Low traction coefficient, helps reduce friction and increase efficiency in sliding mechanisms such as gearing, with potential for reduced power consumption and lower steady-state operating temperatures.

Applications:

1. Mobil SHC 600 Series lubricants are recommended for use in a wide variety of gear and bearing applications where high or low temperatures are encountered or where operating temperatures or bulk oil temperatures are such that conventional lubricants give unsatisfactory life, or where improved efficiency is desired. Filled for life gearboxes, especially high ratio/low-efficiency worm gears.
2. Remotely located gearboxes, where oil change-out is difficult
3. Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
4. Mixer roller bearings and roll neck bearings where high temperatures are encountered
5. Mobil SHC 639 is approved by Siemens AG for use in Flender gearboxes

About Mobil SHC PM 220

Mobil SHC PM lubricants represent a technological advancement in paper machine lubrication. Their excellent performance capabilities in wear protection, oxidation stability, chemical stability, rust and corrosion protection, colour stability and filterability prolong maintenance service intervals, improve machine performance and increase production capacity. They are engineered to provide exceptional lubrication characteristics unattainable with conventional premium mineral oil-based fluids.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity
• Optimum gear and bearing performance
• Reliable flow and lubrication for easy startup, even at low temperatures
• Keeps lubricant lines and flow control mechanisms reduces sludge and deposits formation
• Easy removal of moisture reduces formation of deposits and emulsions
• Reduced energy consumption

Applications:

• Lubrication of severe industrial paper machine circulating systems
• Circulation systems such as calendar rolls operating over a wide temperature range
• Systems that must be started and brought online quickly
• Circulation systems’ lubricating gears and bearings

About Mobil SHC PM 320

Mobil SHC PM lubricants represent a technological advancement in paper machine lubrication. Their excellent performance capabilities in wear protection, oxidation stability, chemical stability, rust and corrosion protection, colour stability and filterability prolong maintenance service intervals, improve machine performance and increase production capacity. They are engineered to provide exceptional lubrication characteristics unattainable with conventional premium mineral oil-based fluids.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity
• Optimum gear and bearing performance
• Reliable flow and lubrication for easy startup, even at low temperatures
• Keeps lubricant lines and flow control mechanisms reduces sludge and deposits formation
• Easy removal of moisture reduces formation of deposits and emulsions
• Reduced energy consumption

Applications:

• Lubrication of severe industrial paper machine circulating systems
• Circulation systems such as calendar rolls operating over a wide temperature range
• Systems that must be started and brought online quickly
• Circulation systems’ lubricating gears and bearings

About Mobil Vacuoline 525

The Mobil Vacuoline 500 lubricants are suitable for a wide range of industrial equipment. They are high performance heavy duty circulating oils designed for the demand of No-Twist-Rod mills. Their all-round performance make them excellent for circulation systems lubricating gears and bearings.

Advantages and Potential Benefits:

1. Long service life reduces replacement costs, minimizes downtime and increases productivity
2. Improved operating efficiency
3. Multi-purpose capability reduces inventory costs and lowers chances of misapplication

Applications:

1. No-Twist-Rod mills
2. Moderate duty spur, bevel, helical and herringbone gear units
3. Circulating systems
4. Mobil Vacuoline 525 can be used in hydraulic systems employing gears, vanes, radial and axial piston pumps where high viscosity anti-wear hydraulic fluids are required
5. Certain compressors and vacuum pumps handling air and inert gases with discharge temperatures not exceeding 150C: unsuitable for breathing air compressors

About Mobil Vacuoline 528

The Mobil Vacuoline 500 lubricants are suitable for a wide range of industrial equipment. They are high performance heavy duty circulating oils designed for the demand of No-Twist-Rod mills. Their all-round performance make them excellent for circulation systems lubricating gears and bearings.

Advantages and Potential Benefits:

1. Long service life reduces replacement costs, minimizes downtime and increases productivity
2. Improved operating efficiency
3. Multi-purpose capability reduces inventory costs and lowers chances of misapplication

Applications:

1. No-Twist-Rod mills
2. Moderate duty spur, bevel, helical and herringbone gear units
3. Circulating systems
4. Mobil Vacuoline 528 can be used in hydraulic systems employing gears, vanes, radial and axial piston pumps where high viscosity anti-wear hydraulic fluids are required
5. Certain compressors and vacuum pumps handling air and inert gases with discharge temperatures not exceeding 150C: unsuitable for breathing air compressors

About Mobil Vacuoline 533

The Mobil Vacuoline 500 lubricants are suitable for a wide range of industrial equipment. They are high performance heavy duty circulating oils designed for the demand of No-Twist-Rod mills. Their all-round performance make them excellent for circulation systems lubricating gears and bearings.

Advantages and Potential Benefits:

1. Long service life reduces replacement costs, minimizes downtime and increases productivity
2. Improved operating efficiency
3. Multi-purpose capability reduces inventory costs and lowers chances of misapplication

Applications:

1. No-Twist-Rod mills
2. Moderate duty spur, bevel, helical and herringbone gear units
3. Circulating systems
4. Mobil Vacuoline 533 can be used in hydraulic systems employing gears, vanes, radial and axial piston pumps where high viscosity anti-wear hydraulic fluids are required
5. Certain compressors and vacuum pumps handling air and inert gases with discharge temperatures not exceeding 150C: unsuitable for breathing air compressors

About Mobil Vacuoline 537

HomeProductsMobil IndustrialMobil Circulating OilsMobil Vacuoline 537

MOBIL VACUOLINE 537

Mobil Vacuoline 537

The Mobil Vacuoline 500 lubricants are suitable for a wide range of industrial equipment. They are high performance heavy duty circulating oils designed for the demand of No-Twist-Rod mills. Their all-round performance make them excellent for circulation systems lubricating gears and bearings.

Advantages and Potential Benefits:

1. Long service life reduces replacement costs, minimizes downtime and increases productivity
2. Improved operating efficiency
3. Multi-purpose capability reduces inventory costs and lowers chances of misapplication

Applications:

1. No-Twist-Rod mills
2. Moderate duty spur, bevel, helical and herringbone gear units
3. Circulating systems
4. Certain compressors and vacuum pumps handling air and inert gases with discharge temperatures not exceeding 150C: unsuitable for breathing air compressors

About Mobil Vacuoline 546

The Mobil Vacuoline 500 lubricants are suitable for a wide range of industrial equipment. They are high performance heavy duty circulating oils designed for the demand of No-Twist-Rod mills. Their all-round performance make them excellent for circulation systems lubricating gears and bearings.

Advantages and Potential Benefits:

1. Long service life reduces replacement costs, minimizes downtime and increases productivity
2. Improved operating efficiency
3. Multi-purpose capability reduces inventory costs and lowers chances of misapplication

Applications:

1. No-Twist-Rod mills
2. Moderate duty spur, bevel, helical and herringbone gear units
3. Circulating systems
4. Certain compressors and vacuum pumps handling air and inert gases with discharge temperatures not exceeding 150C: unsuitable for breathing air compressors